Motocross to the Extreme
Today I got to do a quick 49 minute moto on my favorite practice track in the entire world, Cahuilla Creek Motocross! Track has been great with the new owners and Ron has been doing a great job on the track prep. After a rain he has it fixed back up about as fast as
The new CRF250R’s are fuel injected and a complete new engine. Travis at Thumper got one to 280cc with a big bore and a stroker version out to 300. We did the 264cc version here. Tested one day at racetown and one at Piru and had about eight different test riders all love each of
Parts Unlimited magazine got to test the best mods on a current CRF450R– Hot Cam and high comp piston. Josh Brown for testing riding and Kenny Jones shooting the pics. Came out great!
Tom Morgan at Hot Cams came up with great cams and mapping to put this mod on top of MXA’s mini-test a few months back!
Last minute Hot Cams got Kiniry to fly out from New York state and give it a shot and see the Racer X project bike through.
He came up short the Sunday before the National on a section they ended up taking out for the race. Bummer deal—
We tried for the last national but go hurt so had to go Johnny Jeldera.
These come in the already proven wheel bearing kits and have an o-ring on the inside diameter of the spacer so that no water gets in to the axle/bearings.
A simple drop-in kit that really works!!! Combined with a Hot Cam and FMF pipe.
Great mod by Travis at Thumper!!!!
Last year we went for the 470 big bore but this year we kept it stock bore and hit a homer with this full CV4 mod.
CP made the Custom pistons, Race Tech took care of the suspension and Bennetts Performance put it all together. FMF made custom pipes with self tuning Dynojet power Commander. Will be in Cycle World shortly.
Here is a picture of the Cylinder Works 269cc kit that works on all 2001-2011 YZ/WR 250’s. This is the best mod for your money on a YZ/WR 250. Only $599.95 Cylinder, piston kit and gaskets!
Fits all current YZF250’s and either the cylinder big bore kit alone at 269cc or stroker to go to 284cc — This one was for Moto USA
Transworld Motocross just tested the latest beast I created. Fast Core Mods did the head Work, Millennium the big bore cylinder and CP the high compression piston.
280cc big bore with a CP Piston, FMF Pipe, Millennium Cylinder plating and Thumper put it all together for Cycle World.
Brian at SRC worked with Thumper Racing to make the fastest thing we have ever riden. Josh in his Fox gear is a Quad pro now!
Stock is 76.8mm and big bore is out to 79mm making it 264cc and the results are great! Big power gains for low cost in the new CRF250R with no fuel mapping changes.
The Honda 400 motor is proven but can just use a bit of a boost from a cam and piston. Hot Cams and CP took care of that with a FMF pipe.
Check out this cool Motorcycle USA tire change video we just did during shootouts. http://www.motorcycle-usa.com/708/Motorcycle-Video/Dunlop-Tire-Changing-Guide.aspx We had a great time making it and I hope you find it useful.
Adam Booth from Dirt Bike came out to C&L in Iowa to see the plant and ride the Tom Morgan modified 2010 YZ250 into a 284cc
150cc kit with a Hot Cam and FMF pipe rips and will soon be in Cycle News.
The same for nearly 20 years the Blaster can use some extra power and Dirt Wheels will have this quad in very soon.
Custom CP Piston matched up to a Thumper Advanced Sleeve. Travis at Thumper got this running really good and way more power than stock.
Well, after twelve long weeks of re-habing my dislocated shoulder I am back on a bike (still probably too soon but I have to do it). Much slower of course but I am riding. I have only rode a few times and only at Cahuilla Creek Motocross. Why, because for some reason I feel the
Joe Kosch at 4-Wheel ATV Action just snapping some pics of ATV Pro-to-be Russell Wayman on the built 700XX. Look for this soon in 4 wheel.
Millennium Technologies has cylinder head repair that uses their simultaneous 5-axis computer numeric controlled cylinder head porting center (what is that? so very trick machine to re-cut your seats and install valve guides). The work is great and is as good or better than stock and can save you some money on and let you
What is the most important mod you can do to your current 4-stroke? Make sure it is jetted perfectly. 250F’s are in need of this most and Ron Wood at TokyoMods does a awesome job of making sure your carburetor is perfect after his mods are done you will get rid of any bog you
Fast Core Mods did the full head work and Hot Cams brand new stage 3 cam went into the 469cc Millennium cylinder. FMF Pipe and some serious polishing. One trick 09 Honda CRF450R (well 469cc) We will see this on a TWMX poster coming up soon.
Since 1968 Mammoth Mountain has been going strong and we have been a part of for the last 16 years. We enjoy the great racing and the outdoors of Mammoth. C&L: Hot Cams, Hot Rods, Pivot Works and Cylinder Works are big sponsors as usual. Last week was the Vets then the Mini’s and on
Check out the upcoming August issue of Motocross Action Magazine to see a full test on the 09CRF450R made into a 469cc monster. Great help on this project-thanks to all and especially Tokyo Mods. Just saw the article and not as good as I would like as they felt we had too much bottom end.
Cahuilla Creek MX has long been one of my favorite tracks but it can also be just terrible if the track prep is not good. Well, Danny has got some help now and they are investing in good equipment and staff to ensure there are no “bad days” so far the last two weeks have
40th fastest 250F pro rider at Hangtown! Well, almost. My helper and long time friend Josh Brown gave it a go in the 250 class at Hangtown after nearly a year off of racing and came in at 40th in the qualifying times. However, they only took 38 directly to the show and then a
This weekend was the 250/450 Glen Helen National. The event was incredible and it is amazing to watch up close the top riders in the world ride the most gnarly track on earth. On TV you can’t comprehend what these guys do on the track Jody designed. We were all tired from doing banners and
The AMA Nationals Start this Saturday at Glen Helen and Tuesday they were in full swing getting ready, the National track is incredible! Big jumps and huge hills.
Even with a down economy Milestone MX in Riverside CA, is getting big numbers for their practices. They have very consistent prep and keep things watered nicely. The Main track is a bit gnarly for my taste right now however, the vet track is really good to burn some laps on. The location is great
FMF Polaris 450 project with Fox Shox — came out great. Cain was very impressed with the mucho power.
Here is a pic of the Hot Cams, CP Piston powered LTZ250. You’re not too impressed well there are not many parts for these quads out there and now there is a good kit to power up your wife or daughters quad.
Dirt Bike Ron Lawson, Tom Webb and Adam Booth all enjoyed my 4 250F 2mm over project at Racetown
For this TWMX project we built up a CRF250R into a full blow Arenacross pro level race bike. I didn’t of course have a full blown pro level Arenacross racer so we did the best we could and kinda did a extreme home make over and let made the dreams of a kid from the
I went the funeral for Lusk today. Not too much to say (no one likes funerals do they). I listened to some really nice things said about him from his family and friends. Faisst and Deegan were of course very sad with the loss of their friend. I came in contact with Jeremy as I
Jiri got hurt pretty badly the day after Christmas on one of our secret hill tracks. He had a very close call and a very tough surgery. It is great to see him walking around and doing so well. He now has the splints off his hands and he went to A3 and SD SX
In January we shot this project Yamaha 269cc with a Cylinder Works 3mm over bore cylinder with a CP piston and Hot Cams.
Here is a video that demonstrates how to change a tire on your motocross bike.
Well, after nearly 20 years of working in the industry I am finally official in having my own company. Here I will list some of the current and up to date projects I am working on. In the past few weeks I have just finished up a big CRF250R (4 bikes) test with Dirt Rider.